Exploring Assessment Validation: Steps to Validate Assessments

Exploring Assessment Validation: Steps to Validate Assessments

Blog Article

After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.

We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.

Validation is the process of confirming accurate areas in an RTO's assessment process and pinpointing elements for improvement. With a correct understanding of its components, it’s less daunting.

According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

According to the standards, RTOs must conduct two types of validation.

The first assessment validation type verifies that your RTO's assessments adhere to the training package requirements within your scope.

The next validation ensures that assessments are conducted per the principles of assessment and rules of evidence.

This indicates validation occurs before and after the assessment process. We will focus on the first type: assessment tool validation.

A Look at the Two Types of Assessment Validation

Breaking Down Assessment Validation

As mentioned earlier and in our earlier blog entries, validation is divided into two parts: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.

For this piece, our emphasis will be on assessment tool validation.

Conducting Assessment Tool Validation

Having discussed the two types of validation, let’s delve into assessment tool validation.

Best Times to Conduct Assessment Tool Validation

Assessment tool validation ensures that all elements, performance criteria, and performance and knowledge evidence are included in your assessment tools.

Thus, whenever new learning resources are purchased, assessment tool validation should be conducted before students use them.

There's no requirement to wait for the next validation schedule in your 5-year cycle. Validate new resources promptly to ensure they’re appropriate for students.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- updating your resources
- your scope includes new training products
- review your course against training product updates
- when learning resources are identified as a risk during your risk assessment

The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.

How to Choose Training Products for Validation

Keep in mind, this validation ensures that all learning resources comply before use. All RTOs must validate resources for each unit.

Resources Needed to Start Assessment Tool Validation

Instructional Resources

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – assess its appropriateness for use as an assessment tool. Verify clear instructions and adequate answer fields. This is often a gap.

Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Validation Group

Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.

Overall, your validation panel should have:

Relevant vocational competencies and up-to-date industry skills for the unit being validated

Current expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its successor

Validation document/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
It also serves as evidence that you have validated your resources before students use them.

ASQA does not provide a recommended or required template for assessment tool validation, but many templates are available online. These tools generally have validators review the tools as a whole to determine if they meet the principles of assessment.

Assessment Principles Template Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

A more detailed template is highly recommended for inspecting each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Instructions for Assessment Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Look For?

As outlined in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers follow assessment principles and evidence rules.

Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?

Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?

Validity – Is the assessment evaluating what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?

Reliability – Will the assessment produce consistent results every time, regardless of who conducts the training? Will different assessors make the same decision on skill competence?

Essential Rules of Evidence

Validity – Does the evidence indicate that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool proving that the work is the candidate’s own?

Currency – Do the assessment tools align with current units of competency and up-to-date industry practices?

Even though these are frequently addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:

Be Consistent with Your Teachings

Take note of the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication according to service and regulatory requirements:

changing nappies

bottle preparation, bottle-feeding babies, and cleaning equipment

prepare solids and feed infants

respond to baby signs and cues appropriately

prepare infants for sleep and settle them

monitor and promote physical exploration and gross motor skills suitable for the age

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Watch Out for the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

Entire or Not Competent

Pay attention to lists. As mentioned earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Add More Specificity

Each assessment item should have clear and specific benchmark answers to guide the more info assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What information might be included in a work package?

Possible answers may include:

Compulsory resources

Appropriate costs

Duration of activities

Assigned duties and responsibilities

When an assessment item requires multiple answers, specify how many answers a student must provide. This way, your assessment remains reliable, and the evidence collected is valid.

The same applies to assessment items with double-barrelled questions or questions that ask for more than one answer simultaneously. These can confuse both students and assessors, as illustrated in the example below:

Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.

Answers may include, but are not necessarily limited to:

Weather conditions – work area isolation, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolation, engineering, administration

Structural hazards – substitution, isolation, engineering

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolation, engineering, administrative controls

Steering clear of double-barrelled questions makes it easier for students to answer and for assessors to accurately judge student competence.

Considering these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” However, with these guarantees, you must wait for an audit before they help rectify noncompliance. This affects your compliance history, so it's better to take a safe and compliant approach.